Description
Knox Xenon 12066 6.6kW Hybrid Inverter – Technical Specifications
| Specification | Details |
|---|---|
| Brand | Knox |
| Series | Xenon |
| Model | Xenon 12066 |
| Inverter Type | Hybrid Solar Inverter |
| Phase | Single Phase (1-in / 1-out) |
| Rated Output Power | 6,600W / 6,600VA |
| Surge Power | 12,000VA |
| Output Waveform | Pure Sine Wave |
| Nominal Output Voltage | 220 / 230 / 240VAC |
| Selectable Output Voltage Range | 182–264VAC |
| Nominal Output Current | 28.7A |
| Power Factor | >0.99 |
| Maximum PV Input Power | 12,000W |
| Nominal DC Voltage | 500VDC |
| PV Start-Up Voltage | 80VDC |
| Initial Feeding Voltage | 150VDC |
| MPPT Voltage Range | 120–500VDC |
| Number of MPPT Trackers | 2 (Dual MPPT) |
| Maximum PV Input Current | 22A per MPPT |
| Battery System Voltage | 48VDC |
| Battery Compatibility | Lithium / Lead-Acid |
| Maximum Charging Current | 120A |
| Maximum Discharging Current | 140A |
| Floating Charge Voltage | 54VDC |
| Overcharge Protection | 66VDC |
| Maximum DC/AC Efficiency | 95% |
| European Efficiency | 95% |
| No-Load Power Consumption | <60W |
| Transfer Time – PCs | 10ms |
| Transfer Time – Appliances | 20ms |
| Grid Feeding | Supported |
| Off-Grid Operation | Supported |
| Generator Input | Supported |
| Battery-Independent Operation | Supported |
| Smart Load Management | Dual AC Outputs |
| Parallel Capability | Up to 9 Units |
| Protection Rating | IP66 |
| Display | 7-inch Touchable HMI Screen |
| Cooling | Replaceable Fan |
| Communication | RS-232 / RS-485 / USB / CAN |
| Wireless Monitoring | Wi-Fi |
| Optional Expansion | SNMP / Modbus |
| Operating Temperature | -25°C to +60°C |
| Humidity | 0–100% RH (Non-condensing) |
| Storage Temperature | -15°C to +60°C |
| Maximum Altitude | Up to 1000m |
| Dimensions (D × W × H) | 192 × 414 × 630 mm |
| Dimensions in cm | 19.2 × 41.4 × 63 cm |
| Net Weight | 32 kg |
| Standards | IEC 61682 / IEC 62109-1 / IEC 62109-2 / IEC 61683 |
Knox Xenon 12066 6.6kW IP66 Hybrid Solar Inverter
The Knox Xenon 12066 6.6kW Hybrid Solar Inverter is a powerful single-phase hybrid inverter designed for modern homes, offices and small commercial solar systems. It combines solar, grid, battery and generator operation with intelligent energy management and an IP66-rated enclosure.
With 6.6kW rated output, up to 12,000W PV input, dual MPPT technology and a 48V battery architecture, the Xenon 12066 provides a flexible platform for both solar generation and dependable battery backup.
12kW Solar Input with Dual MPPT
The Xenon 12066 supports up to 12,000W of PV input. Two independent MPPT trackers, each supporting up to 22A input current, help optimize solar generation from connected PV strings.
The inverter operates across a wide 120–500V DC MPPT range, with 80V DC start-up voltage and 500V nominal DC voltage.
48V Lithium & Lead-Acid Battery Support
The inverter uses a 48V battery system and supports both lithium and lead-acid batteries. BMS communication is available for compatible lithium battery systems.
Maximum battery charging current reaches 120A, while maximum battery discharging current reaches 140A, providing strong battery performance for backup applications.
6.6kW Output & 12kVA Surge Capacity
The Xenon 12066 delivers 6600W / 6600VA rated output with up to 12,000VA surge power. Its pure sine wave output makes it suitable for a wide range of household and commercial electrical loads.
Fast UPS Transfer
The inverter provides a 10ms transfer time for PCs and 20ms transfer time for appliances, helping maintain continuity during changes between available power sources.
Grid-Tie, Off-Grid & Generator Operation
The Knox Xenon 12066 supports grid feeding, battery backup and generator input. Its battery-independent design also provides additional flexibility when configuring a solar energy system.
Smart Load Management
Dual AC outputs allow priority-based load management, helping separate essential loads from other connected equipment according to system requirements.
7-Inch Touch HMI Display
A large 7-inch touchable HMI screen provides convenient access to inverter operating information and settings.
IP66 Protection
The IP66-rated enclosure provides a high level of protection against dust and water ingress, making the inverter suitable for demanding installation environments when installed according to manufacturer requirements.
Smart Monitoring & Communication
The Xenon 12066 supports RS-232, RS-485, USB and CAN communication together with Wi-Fi monitoring. Optional SNMP/Modbus expansion is also supported.
Key Features
- 6.6kW single-phase hybrid solar inverter
- Grid-tie and off-grid operation
- 12,000W maximum PV input
- Dual MPPT solar tracking
- 120–500V DC MPPT range
- 22A maximum PV current per MPPT
- 48V battery system
- Lithium and lead-acid battery support
- 120A maximum charging current
- 140A maximum discharging current
- 12,000VA surge power
- Pure sine wave output
- 10ms PC transfer time
- IP66 protection
- 7-inch touch HMI display
- Generator input support
- Dual AC outputs for smart load management
- Parallel operation up to 9 units
- Wi-Fi monitoring
- RS-232 / RS-485 / USB / CAN communication
Ideal Applications
- Residential hybrid solar systems
- Homes requiring battery backup
- Lithium battery solar systems
- Offices and shops
- Small commercial installations
- Solar + grid + battery systems
- Generator-assisted solar systems
Buy the Knox Xenon 12066 6.6kW Hybrid Solar Inverter from Satluj Solar for genuine solar equipment and professional system guidance.
Reviews
There are no reviews yet.